Skill 2 - Build your Horse Fence Materials List
When it comes to installing a safe, long-lasting horse fence, planning your materials correctly is just as important as the installation itself. Ordering too little can stall your project. Ordering too much wastes money. That’s exactly why Episode 2 of the Cameo Installation Skill Builder series exists.
In this episode, Cameo Fencing guides DIY horse owners and professional installers through how to build a complete, accurate materials list for a Cameo™ Horse Fence System—step by step, using real numbers and real-world logic.
If you’re quoting a job, installing your own fence, or double-checking a materials order, this guide breaks down everything covered in the video so you can follow along—or reference it later.
Why a Proper Horse Fence Materials List Matters
A Cameo Horse Fence System is engineered for safety, strength, and longevity, but it only performs as designed when all components work together. Missing even one small part—like an insulator or connector—can slow installation or compromise performance.
This episode focuses on helping you:
-
Accurately calculate total fencing footage
-
Match components to post spacing and fence lines
-
Avoid under-ordering critical hardware
-
Build cleaner, faster, more professional installations
Step 1: Calculating Total Cameo Fence Length
The first step is understanding how much fencing you actually need.
In the video example:
-
Total perimeter: 2,500 feet
-
Number of fence lines: 4
-
Total Cameo fencing required: 10,000 feet
Cameo fencing is available in:
For this job, the most efficient order is:
-
Three 3,000-foot rolls
-
One 1,000-foot roll
This minimizes waste while ensuring you have continuous runs where possible.
Step 2: Corner Post Insulators ("Collars") and Structural Components
Corner Post Insulators/ "collars" are critical for maintaining proper tension and alignment.
In this layout:
-
Number of fence lines: 6
-
Corner collars per line: 7
-
Total corner collars needed: 42
Corner Post Insulators/"collar" secure each line on a single post, making them essential structural components—not optional hardware.
Step 3: Line Post Insulators (Spacing Matters)
Line Post Insulators are calculated based on post spacing, not guesswork.
Using the video example:
-
Fence length: 2,500 feet
-
Post spacing: 12 feet
-
Total posts: 208
-
Fence lines per post: 6
Total Line Post Insulators needed: 1,250
This is one of the most commonly under-ordered items on DIY installs—getting it right upfront prevents headaches later.
Step 4: One-Way Vices and Line Straps
One-Way Vices are used at end and gate posts to properly tension the fence.
In this build:
-
End/gate posts: 6
-
Fence lines per post: 4
-
Total One-Way Vices: 24
Each One-Way Vice requires a corresponding line strap, so:
-
24 line straps are also needed
These components work together to lock the fence neatly to the post while maintaining proper alignment.
Step 5: Fence Links for Roll Connections
Fence Links are used to join sections of Cameo fencing.
A best practice shared in the video:
-
Order one link per roll of fencing
With four total rolls:
-
4 fence links
This provides flexibility during layout and ensures you’re never stuck mid-run.
Step 6: Adding Cameo Pulse (Electric Fence Lines)
For added safety and teaching fencing boundaries, Cameo Pulse™ Electric Lines are commonly installed.
In this example:
-
Electric lines: 2
-
Fence length: 2,500 feet
-
Total electric fencing required: 5,000 feet
Roll size chosen:
-
Five 1,000-foot rolls
This simplifies installation and reduces splicing.
Step 7: End/Gate Post Insulators and Cameo Pulse Clamps ("Electric Line Connectors")
Electric lines must terminate properly at end and gate posts.
Required:
-
12 End/Gate post Insulators (2 per post × 6 posts)
For secure electrical connections:
-
24 Cameo Pulse Clamps ("electric line connectors") (2 per insulator for redundancy)
-
1 additional connector for the charger connection
Redundancy here increases reliability and reduces future maintenance.
Step 8: Choosing a Fence Charger and Grounding System
Every electric fence needs a charger—either:
Once selected, grounding is essential:
-
3 ground rods per charger
Ground rods should be spaced 10 feet apart for optimal performance.
Step 9: Underground Wire Calculations
Underground Wire allows the electric line to pass beneath gates and connect to the charger and ground rods.
In the video example:
-
Gates: 3
-
Underground per gate: 20 feet
-
Ground rod connections: 30 feet
-
Charger distance: 50 feet
-
Additional routing back to charger: 30 feet
Total underground wire required: 140 feet
Recommended purchase:
-
One 165-foot roll
This gives margin without excessive waste.
Step 10: Wing Nuts for Electrical Connections
Wing nuts connect:
-
Bottom electric line
-
Top electric line
-
Underground wire
Required:
-
18 wing nuts (3 per end gate post × 6 posts)
-
1 additional wing nut for charger connection
Total: 19 wing nuts
Step 11: Screws and Fasteners (Wood Posts)
If you’re using wood posts:
-
Line post insulators: 2 screws each
-
Corner collars: 2 screws each
With approximately:
-
1,250 line post insulators
-
42 corner collars
You’ll need roughly 2,500 screws total.
Screws are typically sold in:
Choose based on job size and future installs.
Final Tip: Screenshot the Materials Checklist
The video concludes with a full parts list displayed on screen. Taking a screenshot or printing it ensures you don’t miss anything when ordering.
If you have questions while building your list:
-
📞 Call Cameo Fencing
-
📧 Email info@cameofencing.com
Watch the Full Episode
📺 Cameo Installation Skill Builder – Episode 2
👉 https://youtu.be/ewupn0K8W-M
For more product information, installation resources, and education:
🔗 https://www.cameofencing.com