We consider "The Mule Fiberglass corner or end system"

the ultimate corner and end posts. They are strong, attractive, easy to install, non-conductive, non-corrosive and will last a very-very long time with no attention or maintenance. And there is the added benefit that you do not have to dig a hole to install them. The Mule systems can be used with all equine fencing projects, but it can also be used with regular 12.5 hi-tensile wires or our hi-tensile woven wire.

Installation

The Mule System is extremely easy to install. The fiberglass members are approximately 2" diameter with about a 1/4" wall thickness. They are very stout. Everything is pre-drilled and ready to put together. You just follow the simple steps above. The vertical corner post is also pre-drilled with 2" on center hole spacing, so you can use a 12.5 gauge "U clip to attach your wire to the corner. The hardware pack includes bushings that slide inside the bottoms of the vertical and angle braces - then attach to the auger. The angle braces attach to the vertical posts via galvanized clamps that secure in place. This corner can easily be installed on hill sides or uneven terrain.

Below is pictured a simple gateway, using Mule ends and electrified rope with standard gate handles or Bunji gates.

• Home
• Fence Products
• Accessories
• Posts
• View Cart

"The Mule"
 Fiberglass Corner & End Systems