 |
|
|
Installation Tools
|
|
|
|
Spinning Jenny with Brake
|
|
|
|
|
|
Spinning Jenny with Brake.
wt. 21.32 -
Price: $ 69.75
will ship direct from supplier
|
|
|
|
|
Most high tensile wire is sold as a coil, not on a spool. If you do not use some sort of turntable to dispense the wire, the risk of tangles and personal injury, especially to the eyes, is greatly increased. Set up the spinning jenny loaded with wire on the ground. You can walk away, pulling the end of the wire, and the jenny will spin, preventing your wire from tangling.
|
|
|
|
|
|
|
T-post Driver
wt. 17.30 lbs
Price $ 39.95
|
|
|
|
The spring-loaded, tube-type T-post pounder provides an easy way to set steel T-posts and ground rods in virtually any type of soil. Once the up and down driving pattern is established, the internal spring will "lift" the driver to the top position.
|
|
|
|
|
|
Chain Grab
|
|
|
|
|
|
Chain Grab
wt. 8.50 lbs -
Price: $ 75.50 will ship direct from supplier
|
|
|
|
|
The Chain Grab is used to pull the excess slack out of long stretches before installing permanent in-line wire tighteners. It is equally handy for splicing cut wires or pulling to an end post. It is designed with a long chain, improved wire grab and hook. Use the hook end of the chain when anchoring at an end post. The Chain Grab accommodates smooth or coated wire
|
|
|
|
|
|
|
Post Hole Tamper 66"
wt. 9 lbs
Price $ 19.95
|
|
|
|
The post hole tamper makes the job a little easier. Designed with a 65" galvanized pipe handle and a concave cast iron ramming head, it is ideal for compacting stone and soil around posts.
|
|
|
