|
The jaw system automatically grips the "CAMEO" line, preventing the line from going back.
Pull "CAMEO" hand tight through the one-way vise at the end posts. Then pull an additional 2% of the line through the one-way vise. This assures proper tension on the line. Using the one-way vise eliminates the need for a tensioning tool. It is not necessary to stop and start at every corner, go around the corner to the end post. Note: To eliminate the drilling of end posts you can use gripples at both ends but you need a gripple tensioning tool to pull the correct tension. Example: 400 feet of line, pull an additional 8 feet through the one-way vise.
|
