Purchase CAMEO

1000 ft Roll of Cameo fencing

"CAMEO" 1000 FT $165.00
"CAMEO" 2000 FT $275.00
"CAMEO"3000 FT $385.00

Installing "CAMEO"

Customer Reviews

"I have had horses for over 30 years, had all types of fence and "CAMEO" fencing is by far the best."  Lisa – Calico Farms Miniatures

I used "CAMEO" fencing on our property in California now that we have moved to Oregon I am using it again. It is a great looking, safe fence for our horses. -  Peter Newell

Installation Instructions for Cameo

"CAMEO" fencing Installation Recommendations

Click here to print detailed Installation Instructions and 
Hardware for Installation

We recommend 5 to 6 lines of "CAMEO" on posts spaced 8 feet apart. An alternative is 2 or 3  lines of "CAMEO" in combination with 1 or 2 electric lines. Our white electric lines look like another line of "CAMEO" from a distance, providing a neat looking fence.     The result is a fence that is always working, it has the strength to contain your horses and  the electric to teach them to respect the fence.  Use one of our electric lines for safety and sight line.   See installation instructions.

An electrified fence will reduce the overall number of posts and "CAMEO" lines needed.

Using "CAMEO" in combination with an electrified line, posts can be spaced 12 to 16 feet apart. Insulators hold lines on your choice of line post: wood, metal t-posts, vinyl t-post sleeves, Sunguard Posts or vinyl posts. Using our 2 or 3 inch round vinyl line post eliminates the need for insulators.  Just feed the line through the pre-drilled holes.

 End and corner posts

Wood end and corner posts should be 5 to 6 inches in diameter and 8 feet long. Always use good quality treated wood. Knee bracing is recommended. As seen in the picture above.

Our  5½ inch round vinyl end and corner post systems provide a great  alternative to wood. Mule End and Corner Posts are also an option.

• "CAMEO" is held at the end posts using a one-way vise.
• Drill the end post with a 9/16 inch drill bit.
• Push the "CAMEO" through.
• Slip on the one-way vise.

The jaw system automatically grips  the "CAMEO" line,  preventing the line from going back.

Pull "CAMEO"  hand tight through the one-way vise at the end posts.  Then pull an additional 2% of the line through the one-way vise. This assures proper tension on the line. Using the one-way vise eliminates the need for a  tensioning tool. It is not necessary to stop and start at every corner, go around the corner to the end post. Note:  To eliminate the  drilling of end posts you can use gripples at both ends but you need a gripple tensioning tool to pull the correct tension.  Example: 400 feet of line, pull an additional 8 feet through the one-way vise.

Click here to print Installation Instructions and 
Hardware for Installation

Samples of "CAMEO" available upon request

Hardware to Install

One Way Vise
One Way Vise   Used to hold "CAMEO" secure on end post.  The inside jaws allow the line to go through but not come back, easily holding the correct tension on the line.  One is needed at each end of the line.

$2.95 each  

CAMEO link
The Link joins the line of  "CAMEO" together either as you are installing to continue the line or to repair a break in the line.
$3.95 each 

The large gripple
The large gripple is used to join "CAMEO" or to secure "CAMEO" at end the posts - if you are using on both ends at end posts a gripple tensioning tool is required.  See addition sizes & info gripples

$2.35 each  

Gripple Tensioning Tool
Gripple Tensioning Tool works for all sizes of gripples