 |
|
|
12 1/2 Gauge HT
|
|
|
|
12½ gauge 180 psi High Tensile Wire
|
|
|
|
|
|
12½ gauge 180 psi High Tensile Wire 2000 ft.
51.60 lbs.
Price: $ 45.75
12½ gauge with class 3 galvanization In New Zealand,
180,000
|
|
|
|
|
PSI wire is the standard used for electric and non-electric fences breaking strength of over 1350 lbs
|
|
|
|
Coated Wire
|
|
|
|
|
|
Non-Electric - 1320 ft.,
wt. 68 lbs. $ 164.75
ships direct from supplier (15717)
Available in white, black or brown
|
|
|
|
|
Made from high strength USA 200 12½ gauge wire as the core and is coated with high quality UV-resistant plastic. Overall thickness is approximately. .3 inch
Electric - 1320 ft., wt 68 lbs. $ 169.70
Available in white, black or brown
ships direct from supplier (15717)
The core is 12½" gauge wire and conductive black plastic that comes to the surface in 3 narrow lines that can be electrified. The remaining surface is UV-resistant plastic.
|
|
|
|
|
Spinning Jenny with Brake
|
|
|
|
|
|
Spinning Jenny with Brake.
wt. 21.32 -
Price: $ 69.75
will ship direct from supplier
|
|
|
|
|
Most high tensile wire is sold as a coil, not on a spool. If you do not use some sort of turntable to dispense the wire, the risk of tangles and personal injury, especially to the eyes, is greatly increased. Set up the spinning jenny loaded with wire on the ground. You can walk away, pulling the end of the wire, and the jenny will spin, preventing your wire from tangling.
|
|
|
|
Chain Grab
|
|
|
|
|
|
Chain Grab
wt. 8.50 lbs -
Price: $ 75.50 will ship direct from supplier
|
|
|
|
|
The Chain Grab is used to pull the excess slack out of long stretches before installing permanent in-line wire tighteners. It is equally handy for splicing cut wires or pulling to an end post. It is designed with a long chain, improved wire grab and hook. Use the hook end of the chain when anchoring at an end post. The Chain Grab accommodates smooth or coated wire
|
|
